1. Door balance – Inspect proper balance

2. Rollers – Inspect for excessive wear & tear

3. Cables – Inspect for fraying, kinking & damage

4. Drums – Inspect for unusual defects or cracking

5. Bearings – Inspect for wear & tear or burned out bearings.

End bearing plates, center plate check for signs of bending or in need of replacing

6. Top & Bottom Brackets – Inspect for damage abnormalities

7. Tracks – Inspect for signs of bending, abnormalities & properly secured to walls

8. Jamb Brackets – Inspect for proper installation & secured to walls

9. Hinges – Inspect for properly installed, excessive water & tear and properly lubricated

10. Strut – Check for proper installation and signs of damage

11. Weather Seal – Check for cracking, dry rot or tears

12. Sections – Check for dents, cracks, and properly secured

13. Opener Controls – Check wall console, remotes & keyless

14. Opener Trolley – Inspect for damage, excessive noise & properly lubricated

15. Safety Eyes – Inspect for proper alignment & functionality

16. Opener – Inspect for proper lubrication, noise and battery back up capability

17. Wires – Visually check when possible for wear & tears

18. Limits – Test for proper travel to ensure door opens & closes properly

19. Open/Close Force – Test force being applied to door during the open & close travel

20. Springs – Visually inspect springs for excessive signs of trust & deterioration

21. Pick up work area